Skip to main content Skip to main navigation menu Skip to site footer

Compressive and tensile strength measurement of irreversible hydrocolloid impression material made of brown algae Padina sp

Abstract

Objective: This study aimed to explore the potential of brown algae (Padina sp) by measuring its compressive and tensile strength as a preparation step for making standardized dental impression materials from sodium alginate Padina sp.Methods: This study was a quasi-experimental study with one-shot case design. Brown algae were taken from the waters of Punaga and Puntondo, Takalar. Sodium alginate was extracted from algae then mixed with other compositions to form alginate impression material. Compressive and tensile were tested using the Point Load Test.Results: Compressive strength of impression material made of Padina sp was higher than that of standard impression material with pressure mean 0.011 Mpa and 0.009 Mpa. The mean tensile strength measurement was 0.003 Mpa.Conclusion: Mean compressive and tensile strength of impression material made of Padina sp were still relatively weak.
Section

References

  1. Craig R. Restorative dental materials. 11th ed. St.Louis,
  2. Missouri: Saunders Company; 2006.
  3. Imbery TA, Nehring J, Janus C, et al. Accuracy and
  4. dimensional stability of extended-pour and conventional
  5. alginate impression materials. J Am Dent Assoc
  6. ;141: 32-39.
  7. Hamrun N, Rachman SA. Measuring sodium alginate
  8. content of brown algae species padina sp. as the basic
  9. matter for making dental impression material (irreversible
  10. hydrocolloid impression material). J Dentomaxillofac
  11. Sci 2016;1: 129-133.
  12. Widiyanti P, Siswanto S. Physical characteristic of brown
  13. algae (phaeophyta) from madura strait as irreversible
  14. hydrocolloid impression material. Dent J 2012;45:
  15. -180.
  16. Carlo HL, Fonseca RB, Gonçalves L de S, et al. Analysis
  17. of filler particle levels and sizes in dental alginates.
  18. Mater Res 2010;13: 261-264.
  19. Mushollaeni W. The physicochemical characteristics of
  20. sodium alginate from Indonesian brown seaweeds.
  21. African J Food Sci 2011;5: 349-352.
  22. Sunarintyas S, Irnawati D. Storage duration effect on
  23. deformation recovery of repacked alginates. Dent J
  24. ;42: 126-129.
  25. Walker MP, Burckhard J, Mitts DA, et al. Dimensional
  26. change over time of extended-storage alginate impression
  27. materials. Angle Orthod 2010;80: 1110-1115.
  28. Rohanian A, Shabestari GO, Zeighami S, et al. Effect
  29. of storage time of extended-pour and conventional
  30. alginate impressions on dimensional accuracy of casts.
  31. J Dent (Tehran) 2014;11: 655.
  32. Mour M, Das D, Winkler T, et al. Advances in porous
  33. biomaterials for dental and orthopaedic applications.
  34. Materials (Basel) 2010;3: 2947-2974.

How to Cite

Hamrun, N., Hasyim, R., Mude, A. H., Ikbal, M., Nabilah, T., Safitri, M., & Akbar, F. H. (2021). Compressive and tensile strength measurement of irreversible hydrocolloid impression material made of brown algae Padina sp. Journal of Dentomaxillofacial Science, 6(1), 51–53. https://doi.org/10.15562/jdmfs.v6i1.1190

HTML
160

Total
271

Share

Most read articles by the same author(s)

> >>